Plot files · Explainer
Marla and kanal: sizes in square feet, by society
By Pakizzle Editorial Team · Checked against official sources on
Published · 10 min read

The short answer
Pakistan uses two marla sizes. LDA's 2019 regulations set 1 marla at 225 sq ft in Lahore District and 272 sq ft in other Punjab districts; DHA Lahore also uses 225 sq ft. A kanal is always 20 marla: 4,500 sq ft on the 225 standard and about 5,445 sq ft on the older 272.25 standard.
Key facts
| Fact | Value | Source | As of |
|---|---|---|---|
| LDA Building and Zoning Regulations 2019: 1 marla is 225 sq ft in Lahore District and 272 sq ft in other districts of Punjab; 1 kanal is 20 marla. | 225 sq ft Lahore / 272 sq ft other districts; 1 kanal is 20 marla | LDA Building and Zoning Regulations 2019 (amended to 28-01-2020), copy hosted by Khalid Zafar & Associates | |
| FDA Building and Zoning Regulations 2020: 1 marla is 225 sq ft in Faisalabad District and 272.25 sq ft in other districts of Punjab. | 225 sq ft Faisalabad / 272.25 sq ft other districts (1 kanal is 5,445 sq ft on this standard) | FDA: Building and Zoning Regulations 2020 (copy published on fda.gov.pk) | |
| DHA Lahore Construction and Development Regulations 2014: 1 marla is 25 sq yd or 225 sq ft; 1 kanal is 20 marla, 500 sq yd or 4,500 sq ft. | 1 kanal = 4,500 sq ft | DHA Lahore | |
| Pakizzle's /prices pages count 1 marla as 225 sq ft and 1 kanal as 20 marla when working out price per marla and per sq ft. | 225 sq ft per marla | Pakizzle: Prices, Karachi | |
| DHA Karachi charges its transfer fee per square yard, with bands for plots under and over 1,000 sq yd. | Plots measured in sq yd | DHA Karachi: Fee Structure effective from 1 Jun 2026 |
Ask three people how big a marla is and you may get three answers. That is not because anyone is lying: Pakistan really does use more than one marla. The difference is large enough to change the price you pay per square foot, so it is worth two minutes to get it right.
Quick facts
A kanal is always 20 marla. Every source we checked agrees on that. What changes is the size of a marla.
- 225 sq ft (25 square yards). This is the marla in Lahore District under LDA's Building and Zoning Regulations 2019, and in DHA Lahore under its Construction and Development Regulations 2014. FDA's 2020 regulations use it for Faisalabad District too.
- 272 or 272.25 sq ft. LDA's 2019 regulations give 272 sq ft for "other Districts of Punjab". FDA's 2020 regulations give 272.25 sq ft for the same. 272.25 sq ft is 30.25 square yards, the older size often used in land revenue measurements. Both regulations give the same 25.28 sq m. We did not find an official PLRA statement of the marla size used in Punjab's revenue records, so if you are buying land outside a society, ask the Arazi Record Centre which size the fard for that mauza uses.
So the same "10 marla" label can mean about 2,250 sq ft or about 2,722 sq ft.
Conversion table
The table works out common plot sizes on both standards. Square yards are sq ft divided by 9.
| Plot size | On 225 sq ft marla | On 272.25 sq ft marla | | --- | --- | --- | | 1 marla | 225 sq ft (25 sq yd) | 272.25 sq ft (30.25 sq yd) | | 3 marla | 675 sq ft | 816.75 sq ft | | 5 marla | 1,125 sq ft (125 sq yd) | 1,361.25 sq ft | | 7 marla | 1,575 sq ft | 1,905.75 sq ft | | 8 marla | 1,800 sq ft (200 sq yd) | 2,178 sq ft | | 10 marla | 2,250 sq ft (250 sq yd) | 2,722.5 sq ft | | 1 kanal (20 marla) | 4,500 sq ft (500 sq yd) | 5,445 sq ft (605 sq yd) | | 2 kanal | 9,000 sq ft (1,000 sq yd) | 10,890 sq ft |
If a document uses LDA's rounder 272 sq ft figure, 1 kanal comes to 5,440 sq ft.
The acre. On the 272.25 sq ft marla, 8 kanals make exactly 43,560 sq ft, which is one acre. On the 225 sq ft marla, LDA's 2019 regulations define an acre as 43,560 sq ft or 9.68 kanals. So "8 kanal = 1 acre" only works on the larger marla.
By society and city
| Where | Marla used | What the source says | | --- | --- | --- | | DHA Lahore | 225 sq ft | Regulations 2014: marla "equal to 25 square yards or 225 square feet"; kanal "20 marlas or 500 square yards/ 4500 square feet" | | LDA-controlled Lahore | 225 sq ft | LDA Regulations 2019: 225 sq ft "in case of Lahore District" | | Faisalabad (FDA) | 225 sq ft | FDA Regulations 2020: 225 sq ft "in case of Faisalabad District" | | Other Punjab districts | 272 or 272.25 sq ft | LDA 2019 says 272; FDA 2020 says 272.25 | | Karachi | Square yards | DHA Karachi's transfer fee is charged per sq yd | | Islamabad and Rawalpindi | 225 sq ft (DHA I-R); CDA uses sq yd | DHA Islamabad-Rawalpindi Byelaws 2022 (updated 2023) state plots in square yards, with 1 marla = 25 sq yd (225 sq ft) and 1 kanal = 500 sq yd. CDA sector plots are sized in square yards. | | Bahria Town and other private societies | Varies | No official definition published online (Bahria Town checked 10 Nov 2026); ask the society office in writing, for Bahria on 0800 00100 |

Square feet per marla as written in each authority's regulations. Sources: DHA Lahore 2014, LDA 2019 and FDA 2020 building regulations.
DHA Lahore's own plot dimensions show the 225 standard in practice. Its 2014 regulations list a 5 marla plot as 25 ft by 45 ft (1,125 sq ft), a 1 kanal plot as 50 ft by 90 ft (4,500 sq ft) and a 2 kanal plot as 100 ft by 90 ft (9,000 sq ft). DHA Lahore also prices some of its charges per marla: its schedule from 1 July 2026 sets the residential transfer fee for Phases I to XII at PKR 10,500 per marla, shown as PKR 2.1 lakh for 1 kanal, which is 20 times the marla rate.
Why it matters for price
Suppose two 10 marla plots are both offered at PKR 3 crore.
- On the 225 standard, the plot is 2,250 sq ft, so you pay about PKR 13,333 per sq ft.
- On the 272.25 standard, it is 2,722.5 sq ft, so you pay about PKR 11,019 per sq ft.
The price per marla looks the same, but one plot gives you about 472 sq ft more land. Comparing "per marla" prices across societies that use different marlas is comparing different things.
The same trap works in reverse when you sell. If your land is recorded on the larger marla and you price it against a society that uses 225 sq ft, you may be asking too little for the land you actually own. Work out your plot in square feet first, then compare.
Land area, covered area and square metres
A marla or kanal measures land: the plot inside its boundary. It says nothing about how much you can build.
- Covered area is the built floor area of a house, counted in square feet across all floors. How much of a plot you may cover depends on the authority's building rules for that plot size, so a "10 marla house" in one society can have a different covered area from one next door in another society.
- Flats and shops are sold by their own area in square feet, not by the marla of the building's plot.
- Square metres. LDA's 2019 regulations give the metric figures too: 225 sq ft is 20.91 sq m, and 272 sq ft is 25.28 sq m. Overseas buyers used to metric plans can use these to compare.
If a dealer gives you only a marla figure for a house, ask for both the plot dimensions and the covered area, and check the covered area against the approved building plan.
How to check the size of the plot you are buying

Four checks before you compare prices per marla.
- Ask which marla the society uses, and get the answer in writing from the society office, not only from a dealer.
- Get the plot's length and width in feet from the allotment letter, site plan or demarcation (nishandehi) record. In DHA Lahore, the site plan is part of the NDC paperwork for plots with possession.
- Multiply length by width to get square feet, then divide by 225 or 272.25 to see what "marla" figure it really is.
- Match the figure to the official record. For society plots, that is the society's site plan. For land outside societies, it is the fard (record of rights) from the Punjab Land Records Authority. Ask the Arazi Record Centre to explain how the area is written on your fard and which marla it uses before you compare it with the size being sold.
- Measure on site if the plot is open land or the boundary is unclear. Corner and irregular plots are often slightly larger or smaller than their label.
Red flags
- The dealer quotes a "marla" size but cannot say which standard.
- The length and width on the documents do not multiply to the size being sold.
- An "extra land" or "approx" plot priced as if every extra foot is guaranteed.
- A flat or apartment advertised in marla. Flats are sold by covered area in sq ft, which is a different measure from land area.
- Karachi listings that convert square yards into marla without saying which marla was used.
How Pakizzle helps
Pakizzle's /prices area pages work out a median price per marla and per square foot from listings on the site, and state the method openly: 1 marla is counted as 225 sq ft and 1 kanal as 20 marla. A figure appears only when at least five listings with a price and size are behind it, and the page says how many listings were used. On listings, you can search by City, Area and Block and compare size in both marla and square feet. These are asking prices, not valuations, so use them as a starting point and confirm the plot's real dimensions yourself.
Questions
1 marla kitne square feet ka hota hai?
It depends on where the land is. In Lahore District, LDA's 2019 regulations and DHA Lahore both use 225 sq ft. LDA's regulations give 272 sq ft for other districts of Punjab, and FDA's give 272.25 sq ft. Always check which size the society or the land record uses, and confirm the plot's length and width in feet.
How many square feet are in 1 kanal?
One kanal is always 20 marla. On the 225 sq ft marla used in Lahore District and DHA Lahore, 1 kanal is 4,500 sq ft, or 500 square yards. On the older 272.25 sq ft marla, 1 kanal is 5,445 sq ft. The difference is 945 sq ft, which is about four extra 225-size marlas.
Is a 10 marla plot in DHA the same size as a 10 marla plot in a village?
Not necessarily. A DHA Lahore 10 marla plot is about 2,250 sq ft, because DHA uses 225 sq ft per marla. A 10 marla piece of land measured on the 272.25 sq ft standard would be about 2,722 sq ft. Compare plots in square feet or by their length and width, not by the marla label alone.
How many kanals are in an acre?
On the 272.25 sq ft marla, 8 kanals make 43,560 sq ft, which is exactly one acre. On the 225 sq ft marla, LDA's 2019 regulations say an acre is 9.68 kanals. So '8 kanal = 1 acre' only holds on the larger marla.
Karachi mein marla kyun nahin chalta?
In Karachi, plots are usually described in square yards. DHA Karachi, for example, charges its transfer fee per square yard. One square yard is 9 sq ft, so a 500 sq yd plot is 4,500 sq ft, the same as a 225-standard kanal. A 120 sq yd plot is 1,080 sq ft.
Sources
- Lahore Development Authority: Building and Zoning Regulations 2019, amended to 28-01-2020 (PDF copy hosted by Khalid Zafar & Associates)
- Faisalabad Development Authority: Building and Zoning Regulations 2020 (PDF)
- DHA Lahore: Construction and Development Regulations 2014, updated (PDF)
- DHA Lahore: Revision in Dues, w.e.f. 01 Jul 2026 (PDF)
- DHA Lahore: Possession Opening Ceremony Phase IX Prism
- DHA Karachi: Transfer Fee Structure (PDF, 2022)
- Pakizzle: Prices, Karachi (method notes)
- DHA Islamabad-Rawalpindi: Revised Byelaws and Regulations 2022 (updated 2023), PDF
- DHA Karachi: Fee Structure, rates effective from 1 Jun 2026 (PDF)
Tools for this
Related guides
- Balloting: what happens and what to check Plot files
Balloting assigns a specific plot number to each eligible file holder, usually by computer, and turns a file into a plot.
- Possession and development charges explained Plot files
The plot price is rarely the full cost. Development and possession charges can add lakhs, and the buyer often inherits unpaid dues.
- How to verify a plot file before you buy Plot files
Before you pay for a plot file, check the society, the seller, the file itself and the dues.
- Plot files explained: file, balloted, possession, developed Plot files
A plot file is a promise of a plot, not a plot.